tungsten woven mesh
Date: 2026-03-26 Categories: 产品中心 Views: 350
Tungsten woven wire mesh, high density & high melting point
Other physical and chemical properties
- Density: 0.697 lb/in³
- Tensile strength: 330 ksi*
- Elongation: 1%*
- Melting point: 6170 °F
- Maximum working temperature: 2370 °F
*Tensile strength and elongation apply to annealed wire of 0.012 inch diameter. Wire with other diameters will have different properties.


Tungsten woven mesh is a high-performance metal mesh woven from pure tungsten wire. With an ultra-high melting point (3422°C / 6192°F), superior high-temperature stability and good mechanical performance, it is preferred for extreme service conditions. Details including core features, applications and specifications are presented as follows.
一、Core Characteristics
- Melting point: 3422°C (highest among metals). It maintains structural stability without melting or deforming under ultra-high temperature conditions.
- Density: 19.3 g/cm³. High density delivers excellent radiation shielding and structural rigidity.
- Tensile strength up to 1500 MPa, withstands high loads, not easy to break or deform.
- Coefficient of thermal expansion: 4.5×10⁻⁶/°C (the lowest among metals); excellent dimensional stability at high temperatures with minimal thermal deformation.
- Excellent corrosion resistance (especially acid resistance); long-term stable operation in harsh chemical environments.
二、Key Applications
- Vacuum & high-temperature furnaces: heat shields, heater support mesh, sinter trays, heat treatment grids
- Metallurgy / Materials: high-temperature filtration, catalyst supports, components for single crystal growth equipment
- Aerospace: engine hot-section parts, high-temp structures for rocket nozzles, satellite thermal control systems
- Electromagnetic shielding: RF shielding mesh, computer chassis shielding, microwave equipment protective mesh
- Electron microscopes: grid mesh, sample support mesh
- X-ray equipment: X-ray shielding, electron emitters
- Radiotherapy: accurate radiation shielding for normal tissue protection
- Laboratory equipment: high temp reaction vessels, plasma confinement devices, gas flow test fixtures
- Chemical industry: corrosive liquid & gas filtration, high-temperature reactor liners
- Nuclear industry: radiation shielding, nuclear reactor component supports
- Optics: special light filter elements, high-temp optical instrument parts
三、Specifications and Classification
- Plain Weave: Most widely used; uniform apertures and high strength for general applications.
- Twill Weave: Higher strength, suitable for heavy-load applications.
- Dutch Weave: High density, suitable for fine filtration.
- Wire diameter: 0.05–1.0 mm; custom sizes as fine as 0.01 mm available
- Mesh count: 1–500 mesh (selected according to application scenarios)
- Dimensions: standard 200×200 mm, large sizes customizable (e.g. 1000×1000 mm)
四、Selection Guidelines
- Ultra-high temperature (>2000°C): Pure tungsten mesh must be selected.
- Medium-high temperature (1000–2000°C): W-Mo alloy mesh is an option for cost savings.
- Filtration: Choose suitable mesh size; 100–300 mesh is typical.
- Support applications: Wire diameter ≥0.2 mm to ensure sufficient strength.
- Shielding: Mesh opening ≤0.1 mm to ensure shielding performance.
Notes:
- Tungsten material is relatively brittle; avoid violent impact during installation and use.
- Pre-oxidation treatment is recommended before high-temperature use to improve oxidation resistance.
- Check for deformation periodically during prolonged high-temperature service.










